Parameters:
| Model number | PUR-B2.5 |
| Number of spray guns available | 1-3 (can be equipped with glue gun) |
| Maximum viscosity | 500-12,000 CPS |
| Maximum operating temperature | 260℃ |
| Electricity demand | 220V, 50HZ monophase |
| Glue machine power | 2000 KW |
| Motor population | A set |
| Number of gear pumps | A set |
| Motor speed | Variable frequency speed regulation 0-50r |
| Maximum glue supply | 2~10L/h |
| Number of insulation pipes | 1- 3SET |
| Weight of glue machine | 120 KG |
| Glue machine size (mm) | 682×380×745 |
| Melt tank capacity | 2 -6L |
Mini 2 kg gear pump hot sol machine advantages:
1, the plastic machine body is small and convenient, light weight, small space, can change the working area at any time according to the need, strong mobility.
2, the use of imported equipment technology to control the operation of the machine, simple operation, easy maintenance.
3, a wide range of applications, can be widely used in packaging, sealing, cosmetics, toys, baby products, home textile mattress sofa and other related industries.
4, can choose to be equipped with a single nozzle or equipped with flexible hot melt hose, can be used in one machine to save costs.
5, with a smaller model body than the traditional glue machine, the glue amount is not a powerful function.
6, the sealing of the rubber cylinder is strong, to avoid the deterioration of the internal materials caused by contact with air during the working process.
7, the internal pressure holding ability and constant temperature ability, eliminate and reduce gum carbonization and meet the requirements of environmental protection and energy saving.
8, the use of progressive heating and imported technology to reduce unnecessary losses.
9. Gradually try to heat the melt glue: the pur-026 rubber drum is divided into two layers of heating trays. When the upper temperature reaches the set melting point, the glue is melted and flows to the lower part of the rubber drum.
10. All rubber cylinder parts with Teflon protective layer: the equipment is easier to clean, pur rubber is not easy to plug and carbonize, providing service life.
11. Split rubber cylinder: The rubber cylinder part can be split disassembled and cleaned for easy cleaning.
12. The use of high-precision gear metering pump, stainless steel precision return valve (mechanical or pneumatic test) optional, pur does not produce bubbles, stepless speed regulation/inverter speed regulation/servo speed regulation, the use of deceleration motor/servo motor, the rubber is uniform and stable.
Matters needing attention
1, the glue cylinder storage amount is less. (Recommended for use in work with relatively little glue demand).
2, because it is a progressive heating method, the temperature rise is slower than that of ordinary glue machines.
3, the temperature in some areas of the glue machine is too high, and protective equipment must be worn during the operation.
4, the operation of the equipment or the replacement of a part of the equipment needs professionals, or under the guidance of.
5, equipment maintenance can not use gasoline, diesel cleaning, neglect may lead to machine damage or can not operate normally.
